ersatz monarch 3d model:
Project Started: August 2008
Project Completed: In Progress
VIEW 3D
PROJECT FILES
The 3D Model will be built in a
number of phases:
1.) Scan Franz Pitzinger's original plans to Raster format (Completed -
Thank you Erwin Sieche) - COMPLETED
2.) Clean up the Raster images to remove any noise issues and
straighten them out horizontally.
3.) Redraw Pitzinger's construction plans in AutoCAD 2008. Organize all
views and ensure accuracy between all views.
4.) Rotate the 2D AutoCAD drawings into a 3D environment.
5.) Construct the 3D model using the 2D lines from AutoCAD in Rhino 3D.
6.) Convert the nurb model to polygon mesh in Rhino 3D
7.) Transfer the model to Cinema 4D via OBJ format.
8.) Apply textures (UVW mapping), lighting and environment in Cinema 4D.
9.) All renderings will be completed in Cinema 4D using Advanced
Renderer.
redraw franz pitzinger's plans:
Displayed here are Franz Pitzinger's plans for the Ersatz Monarch class battleship. These plans are being redrawn in AutoCAD before a 3D model is created.
TAFEL01
- CONSTRUCTION PLAN
(Redraw
progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL02
- MIDSHIP SECTION
(Redraw progress = 0% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL03
- EXTERNAL PROFILE
(Redraw
progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL04
- UPPER DECK PLAN
(Redraw
progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL05
- UPPER DECK
(Redraw
progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL06
- BATTERY DECK
(Redraw
progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL07
- CENTRAL DECK
(Redraw
progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL08
- TANK DECK
(Redraw
progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL09
- TWEEN DECK
(Redraw
progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL10
- UPPER AREA
(Redraw
progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL11
- LOWER AREA
(Redraw
progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL12
- LENGTH CUT
(Redraw
progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL13
- SECTIONS
(Redraw
progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL14a
- ARMOUR PART I
(Redraw progress = 0% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL14b
- ARMOUR PART II
(Redraw progress = 0% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL15
- ERWIN SIECHE SKETCH
(Redraw progress = 0% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL16
- ADDENDUM 3 - SWIFTNESS CURVE DIAGRAM
(Redraw progress = 0% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL17
- SUPPLEMENT 4 - ENGINE ROOM LAYOUT
(Redraw progress = 0% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL18
- CANNON PATTERN
(Redraw progress = 0% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL19
- ROLL KEEL
(Redraw progress = 0% Complete)
CLICK ON THE IMAGE TO ENLARGE
TAFEL20
- HEADLIGHT PLATFORM
(Redraw progress = 0% Complete)
CLICK ON THE IMAGE TO ENLARGE
350mm gun turrets:
SKODAWERKE - Aktien Gesellschaft - No. 53t/949:
Pilsen, im July 1912 - 350mm gun turrets of the Ersatz Monarch with the triple turret superimposed over the twin turret.
(Redraw progress = 100% Complete)
CLICK ON THE IMAGE TO ENLARGE
The following information is from Erwin Sieche (who provided me with these drawing plans):
"Please keep in mind that the yard/or the naval technical comittee prepared only the ship plans. The detailed weapons plans had to be submitted by the manufacturer, e.g. Skoda.
So this is an earlier variant with a superimposed triple turret. In the first stages of design this was chosen to have enough distance between the bigger diameter of the triple turret barbette and the hull. Apparently this was later changed to superimposed twin turret because of the weight factor.
As said before I was not able to find a summer 1914 version of the 35 cm turrets. May be that this was never presented to the naval section."
LINE DRAWING BY ERWIN SIECHE - 350MM GUN TURRETS (1914)
(Redraw progress = 100% Complete)
